Cobalt-digital COMPASS 9035 Analog and SDI Input to SDI Output Co Uživatelský manuál Strana 89
- Strana / 106
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
9035-OM (V4.4) 9035 PRODUCT MANUAL 3-45
Operating Instructions 9035 Function Submenu List and Descriptions
(continued)
• Preset Save and Load • Preset Save stores all current card control settings to the currently
selected preset.
(For example, if Preset 1 is selected in the Selected Preset drop-down
list, clicking and confirming Preset Save will then save all current card
control settings to Preset 1)
• Preset Load loads (applies) all card control settings defined by
whatever preset (Preset 1 thru Preset 16) is currently selected in the
Selected Preset drop-down list.
(For example, if Preset 3 is selected in the Selected Preset drop-down
list, clicking and confirming Preset Load will then apply all card control
settings defined in Preset 3)
The above buttons have a Confirm? pop-up that appears, requesting
confirmation.
Note: Applying a change to a preset using the buttons described above
rewrites the previous preset contents with the invoked contents.
Make certain change is desired before confirming preset change.
• Selected Preset Selected Preset 1 thru Selected Preset 16 range in drop-down list
selects one of 16 stored presets as ready for Save (being written to) or for
Load (being applied to the card).
Note: The preset names shown to the left are the default (unnamed)
preset names. All 16 presets in this case are loaded identically with
the factory default settings.
• Card Name Text entry field provides for optional entry of card name, function, etc. (as
shown in this example).
Note: Card name can be 31 ASCII characters maximum.
Table 3-2 9035 Function Submenu List — continued
•
•
•
- Product Manual 1
- Copyright 2
- Disclaimer 2
- Trademark Information 2
- Table of Contents 3
- Introduction 5
- Cobalt Reference Guides 6
- Manual Conventions 7
- 1 Safety Summary 8
- 1 9035 Functional Description 10
- small, progressive 11
- 9035 Functional Description 13
- Audio Processor Description 13
- 2.0-to-5.1 Upmix Function 15
- Tone Generator Function 17
- Audio Routing Example 17
- Zero-DEClay Audio Embedding 19
- Low-Latency AES Passthrough 19
- Decoding (9035-DEC only) 19
- User Control Interface 21
- 9035 Rear I/O Modules 23
- 1 Technical Specifications 26
- Technical Specifications 27
- 0 V ± 50 mV 28
- 1 Contact Cobalt Digital Inc 32
- Installation and Setup 33
- Installing a Rear I/O Module 36
- reference guide 43
- This page intentionally blank 44
- Operating Instructions 45
- DashBoard™ User Interface 47
- 3396B_3346BGEN.JPG 48
- 3370_3372BGEN.JPG 48
- DB_ACCESS1.PNG 49
- 9035_DB_ACCESS2A.PNG 49
- Remote Control Panel 50
- 9035_CARD_INFO.PNG 51
- (continued) 56
- Framesync 60
- Reset Framesync 64
- Embedded Audio Group 1/2 65
- Embedded Audio Group 3/4 69
- Dolby Decoder 76
- Closed Captioning 78
- Timecode 79
- AES Ch 1 - Ch 16 83
- AN-AUD Ch 1- Ch 8 83
- Embed Ch 1 - Ch 16 83
- Licensable Features 88
- AUD_ROUTE_EX1.PNG 92
- AUD_ROUTE_EX3A.PNG 93
- AUDIO_ROUTE_EX3B.PNG 93
- Figure 3-7 Dolby 94
- 3 Troubleshooting 100
- Troubleshooting 101
- in this case 102
- Cobalt Digital Inc 106
Související produkty a manuály pro Příslušenství pro video Cobalt-digital COMPASS 9035 Analog and SDI Input to SDI Output Co
(20 stránky)King Canada KC-ES manuály
Uživatelské manuály a uživatelské příručky pro Nástroje King Canada KC-ES.
Poskytujeme 1 manuály pdf King Canada KC-ES ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Komentáře k této Příručce